Monday, 8 August 2011

Easel card iwith drawer

2 square cards measuring 5 1/4" x 5 1/4"
4 pieces of card 3" x 5 1/2"
4 pieces of card 2 7/8" x 4"
Wet Glue
1.Take one of the cards and fold on the score line. Divide the front piece into two score and fold.
2.Cut the second card in half and stick to the edge flap you have just created. The creates your basic easel card decorate as required. Put the other half to one side for the base.
3. To make the tubes take the 3" x 5 1/2" and score at 2", 2 1/2", 4 1/2" and 5". Put the glue on the 1/2" flap and stick to create the tube. Repeat with the other 3 pieces of card.
4. Score a 1/2" all round on the remaining 4 pieces of card.Put a brad on one end of each tray. Snip into the corners and glue into place. Leave to dry.
5. Take the tubes and arrange on to the base card glue into place. Stick the easel card onto the top of the tubes.
I hope this helps I will try and post the instructions for the 6x6 card later.
Check further down for a picture of the card.

3 comments:

CraftyLoops said...

Thank you for the great instructions. Lee x

sparklingblackrose said...

Thank you, I must try one! Elaine-xxx-

alifrew said...

Thanks for the instructions, I've always wanted to make one of these. Will have a go later xx